The Process Of Skinning A Deer
Posted by Ben Vinson | Filed under Recreation & Sports
After the thrilling and fun session of hunting in the wild, bringing a hunt target like deer home will make you feel perfect. Yes, we were once used to the situation where men hunted to find food for their family. The fun still sticks to some people until now. But then it is time to skin the deer.
The skin and muscle tissues of the deer are naturally separate from one another because of the protective membranes, making the process of skinning a lot more like following a built-in blueprint than like trying to lift a rug in the dark.
You should first hang the deer creating a greater leverage point for skinning the deer. This also ensures that the meat will stay clean. It is important to try to skin the deer within an hour or two of the deer’s death.
Your knife should be especially sharp. Supposing the deer is hung by the legs, find the large tendon connecting the lower leg segment to the rest of the deer’s leg. You should poke a whole with your knife in between the tendon and the bone there, then use your fingers to feel the lump that is created by the deer’s bone.
After that, find two parts of the double joint at the lower part of body to be torn. The leg should then be broken to ease the skinning process.
Once the legs are broken, you should make some other openings around the tendon and near the front legs. Keep an opening between the tendon and bone at the lower leg. Just remember to make some openings near the lower leg areas.
After that, we move deeper to the front legs. Break and make openings just like you do with the lower legs. Get inside the skin near the lower leg openings and pull it off to start the skinning process.
The skinning process may be hard in the beginning since the skin is quite tight. But once you can pull off some inches, the rest will be easy to finish. And even more after you see the meat, the reward of your hunt.
For a standard rule, skinning a deer can take from ten to fifteen minutes depends on how fast you can do that. It is just one step closer to enjoy and show off your hunt. It may be hard for hunt novices, but they will learn quickly after few times of hunting.
Ben Vinson is a fan of many things including writing about his hobbies. You can read more from Ben at the Cheap Hunting Knives store and Cheap NFL Jerseys store. See you there!
Tags: animal, buck, deer, doe, hobby, hunt, hunting, kill, knifing, Recreation & Sports, skin, skinning
The Kershaw Blur Razor Sharp Review
Posted by Jimmy Fuller | Filed under Recreation & Sports
Kai USA is one of the most recognizable manufacturers of knives. Its flagship Kershaw knives brands are reputable for their quality and have a fiercely loyal fan base. That’s why there would be a high level of expectation on the Kershaw Blur range of knives by anyone who has handled a Kershaw knife before. A casual look at the Kershaw Blur knife and one can tell that a significant amount of attention and detail has gone into enhancing the aesthetics of the knife while taking care not to compromise the effectiveness of the knife.
The vast majority of Kershaw knives tend to have a naturally shaped handle, but the new Kershaw Blur sports a much flatter and sleeker design. In order to accommodate this, they have used a special tape on the grip so that the knife can still be handled effectively without having to worry about it slipping out of the hand.
The knife handle is light and durable since it is made from anodized aluminum-the same type of metal that is used for building airplanes. The approximate weight of the Kershaw Blur is about 4.2 oz which is impressive when one considers that the knife is about 4.5 inches long.
Unlike the handle, the blade has been manufactured from high grade stainless steel in order to guarantee strength, and to prevent it from becoming damaged by corrosion. There’s also no need for a buyer to sharpen the knife when they purchase it because they are sharpened prior to being shipped. Another outstanding quality of the knife is that the blade retains its sharpness for a longer period of time than most other comparable knives.
One of the things that some Kershaw die-hards might have a problem with when it comes to the Kershaw Blur might be the integration of a thumb-stud as opposed to the usual trigger. Strictly speaking, this in itself might not be a problem and the main issue here would likely be the discomfort experienced Kershaw knife veterans that might have gotten used to the trigger now having to contend with this new mechanism.
Kershaw die-hards will also be pleased to discover that the Speed Safe concept has been retained, and so has the ability to open the knife with just a single hand.
It should also be mentioned that even though the blade has been manufactured from high quality stainless steel, that doesn’t mean that it’s impossible for it to rust. With that said, it’s not very likely unless your knife is stored primarily in an area that is excessively humid. For the average person however, the chance of seeing any rust appearing is minimal.
At present, Kershaw Blur knives are available in gray, black, and red, and they come with a price tag which ranges between $60 and $65. For those who are keen to get their hands on one of these outstanding knives, you can do so either by visiting an authorized dealer or by ordering online.
Want to learn more about Kershaw Knives? Then stop by the leading Kershaw site where you can find out all about the Kershaw Blur and what it can do for you.
Tags: camping, hunting, kershaw blur, kershaw knives, knives, outdoors, Recreation & Sports, sports
Binocular Harness Strap Makes Birdwatching Easier
Posted by Bart Icles | Filed under Recreation & Sports
Are you a serious bird watcher? You enjoy trekking through fields, along streams, and hiking up hills to spot birds? Birds move fast, in a moment they can be sitting right in front of you, and the next moment they are long gone. Your binoculars need to be ready all the time. Using a binocular harness strap can help you be ready, before the bird escapes.
Hiking down the trails along a creek can be a bit challenging, with the overhanging limbs and tall grasses pushing onto the trail. To see some birds in their natural habitat, you must take these journeys. The hike can become even more challenging when your binoculars are swinging back and forth. You lean down to step under a branch, and your binoculars swing wildly out, threatening to crash into the ground, or the surrounding plant life. You don’t want to put them away, because you know the moment you do, you’re going to miss sighting the bird you’re searching for.
With a Bushnell binocular harness, or a Nikon Prostaff binocular harness strap safely keeping your binoculars against your body, you will be able to move freely, and quickly down the trail. When you bend over, your binoculars stay against your body, and do not come swinging wildly down. You can keep them out, and ready for bird spotting.
Once you have tried a bino harness, you will understand they are not only for keeping your binoculars safe, they are very comfortable. The weight of the binoculars is not concentrated on your neck. Now the weight is balanced on your body. With a standard strap, along with the swinging of your binoculars you can get a very sore neck. With a binocular harness, your neck is not carrying the load, and not feeling the strap rubbing back and forth as you walk.
A binocular harness is very adjustable, and can be used for people of any weight, and height. You can adjust your level of tightness to suit the manner of movement you like. With a standard strap you have only two options, loose or looser. Knowing you can safely drop your binoculars down into the waiting position is especially helpful when you want to quickly grab a camera, or a GPS to record your sighting.
Freedom from a swinging set of binoculars is going to make your days out in the wild easier and more enjoyable. You will love the freedom of a binocular harness.
At MyBinocularHarness.com you can find a binocular strap harness and much more.
Tags: bird watching, hunting, outdoors, photography, photography gear, Recreation & Sports
What are the Different Parts of a Bowie Knife Blade Used For?
Posted by Dylan Sabot | Filed under Recreation & Sports
If you have just purchased your first bowie knife, or even if you have been an avid collector of these blades for a number of years, it can be difficult to determine exactly what all the different parts of the blade are supposed to be used for. Part of this confusion stems from the myriad different styles of blade out there. For instance, you’ll find modern bowies that have saw-tooth edging on the spine, while historically accurate models do not include this feature. What are the different parts supposed to do?
Clip Point - Your bowie knife has one defining feature; it has a clipped point. This is the end of the blade and it looks like someone cut a section out of the tip. This is an important feature and serves several purposes. First, it serves to narrow the point of the knife, giving you greater control during use. Second, it ensures that the bowie knife has better penetrative (stabbing) power. As you might imagine, these benefits come in quite handy.
False Edge - The false edge of a bowie knife is the portion of the point that curves inward and upward from the point to meet the spine of the blade. This has little use unless sharpened (these are called Sheffield Bowies). When sharpened, the false edge allows for back cutting, but also provides better performance when skinning, gutting or stabbing, as it increases the tip’s cutting surface significantly.
Spanish Notch - The Spanish Notch is another sometime inclusion. You’ll find that this notch offers little in the way of enhanced usability, but it does provide you with a handy point to start sharpening the blade. The notch sits at the back edge of the blade, just before the ricasso. This might have originally been used to help skin branches, or have been used to work with nautical rigging or other rope forms, but today it has few uses and is rarely found except on historically accurate bowie knives.
You will find a bowie knife that offers features that fit your needs with a bit of searching. Make sure that you understand the different uses of all the blade areas, prior to making any purchase decision, though. This is the only way that you can ensure you get the right bowie knife for your particular usage needs.
Dylan Sabot is the owner of an online bowie knife store featuring the jim bowie knife as well as lighters for camping.
Tags: bowie knife, bowie knives, camping, fishing, Hobbies, hunting, hunting knives, outdoors, recreation, Recreation & Sports, Survival
Understanding Bow Hunting
Posted by Arthur Smith | Filed under Recreation & Sports
Even though the compound bow is a recent invention the bow is a hunting tool that has been around for millennia. Hunters use compound bows for hunting today because they are most accurate and strongest. Of course in order to be a successful bow hunter you will need to be aware of a few more things in addition to the bow.
When bow hunting you will have to really get close to the prey to increase your chances of getting a kill. This even though an art on its own, tracking, hiding and shooting, you will have to keep an eye out for potential dangerous prey that could attack hunters.
Many hunters who prefer to use bows for their hunting do equip themselves with certain kinds of equipment that gives them other kinds of advantages over their prey. Hunters equip themselves with global position systems to keep track of their whereabouts, special sensors even night vision equipment when hunting at night.
Keep in mind that when bow hunting the methods employed to hunt vary based on what kind of prey you will be hunting for. Big prey requires different tactics than smaller prey. Big prey refers to deer, elk, caribou, moose, and large boar whereas small prey could be rabbi and birds. Regardless, the hunter needs to be aware of the details concerning the type of prey they are going after.
Learning from more experienced hunters is very important especially if you are a beginner hunter. You might want to consider taking on a couple of organized hunting trips with other experienced hunters and learn a few things about the prey and the techniques required to attract it.
A good bow hunter must know these techniques when hunting for a particular species. Aside from knowing how to bait and be able to not get detected a good bow hunter must have all the right equipment. The most important part of the hunters gear is the hunting bow. There are many types of hunting bows out there however compound bows are preferred by most bow hunters.
It is not hard to find good Cheap Compound Bows. There are many types and makes to choose from. If you are getting a bow for a youth then we recommend searching for Bowtech compound bows.
Tags: bow and arrow, Bow hunting, bows, compound bow, game, Hobbies, hunting, hunting bows, hunting techniques, hunting with bows, outdoors, Recreation & Sports, sports
What Is A Compound Bow
Posted by Billy Smith | Filed under Recreation & Sports
Bows come in a variety of shapes and sizes; there are different classifications, which serve uniquely in a number of sports, competitions, leisure hunts, etc. Among which is the compound bow.
The compound bow uses a levering system consisting of pulleys and cables. The reason for this is to have better energy retention in the bow as it bends the limbs and draws the strings. The central mount or the riser for instance is commonly made from magnesium or aircraft grade aluminum alloys; this is the component, which the limbs, stabilizers, sights and quivers are connected.
The riser or the central mount is nowadays made from aircraft grade aluminum alloy or magnesium alloys, and in some case, a combination of both. The riser is where the sights, stabilizers, quivers and limbs are connected. The limbs are made from composite materials allowing it to withstand the stress from the stored energy from drawing the bow; this is where all the energy goes to without leaving tension to the cable and the pulleys.
The arrows used in the compound bows are also commonly made up of carbon or aluminum alloys. This provides the security for the archer that the arrow will not accidentally break and drive up toward them as the amount of energy generated by the bow is of impeccable strength.
The key factor in the acceleration and accuracy of the arrow is the cam or the pulley. The advantage of which is that it enables the archer to set their preferred walls and draw lengths or points; this is vital as this will help determine the archer’s consistency in their draw point and their accuracy.
The compound bow is rather unique from others and which is why a large number of archers prefer this instrument as it is cannot be affected by sudden temperature changes and humidity. It does not alter the bows capability to still be able to draw a consistent shot while retaining its accuracy no matter the humidity and temperature.
As with most other things, there are certain advantages as well as disadvantages to the compound bow. For instance, the compound bow has a lower holding weight thus making it susceptible to faults particularly when the archer has done a full draw; this makes the bow prone to left-right errors. Overall compound bows are versatile instruments. They are used by archers and hunters alike and are constantly evolving.
There are several types of left handed bows available on the market today. If you are into hunting then the best choice should be to find left handed compound bows for sale. Compound bows pack that extra punch for great hunting.
Tags: Archery, bows, compound bows, Hobbies, hunting, hunting bows, Left hand bows, outdoors, Recreation & Sports, Shopping, sports
Fat Redfish with Capt. Paul Braly
Posted by Captain Paul Braly | Filed under Recreation & Sports
Jeff and I went fishing today. We were trying to do some stretching and pre-fishing for the tough competition Texas trout series which will happen on this weekend. We both found fishing at this spot very tough this time. What saved our day was the Devil Eyes lures that we brought along.
As we go through the water, we only found a single inshore fish hopping the wide area, unlike the other day where I saw much of them. Few minutes later, Jeff got the first bite with the Devil Eye of Amber color with 1/4 ounce Truloc. The first hook was empty though. Then I got my hook bitten but it was another empty lure as well. After waiting for another few minutes, the hook got an 18″ Speckled trout on it, and then we went to the second spot.
Jeff and I went to the second spot which was a cleaner one. I decided to put on a Dark Strawberry Blue Devil Eye while Jeff was pulling the white stink bait he had. We both jumped out of the boat with our lures and we looked for better hook-ups but there was nothing for both of us on this spot.
We then came to an area that we needed the boat to get to the other side of to continue our wade so Jeff being the good guy that he is went back and brought the boat.
We continued wading through the deep water to the other side. We checked for the right spot by measuring the depth through a rod. Then we were able to find a spot and I tried casting a lure and got myself a fat redfish. Shortly, I saw Jeff casting his Devil Eyes and he got one too. After some time we both got some more redfish.
During tough fishing, it is always a good decision to bring along and use the Devil Eyes for fishing. Jeff and I used it with 10-11 o’clock triple bounce pausing every 5 seconds and then repeat the casting of lures. If you are having hard time fishing, like what we experienced, always use a bait that can stand the tough situation and make a pattern with every cast and the reds will surely bite in.
Captain Paul Braly is a professional fishing guide who specializes in wadefishing for big speckled trout and redfish in Texas, and uses Brown Lures’ salt water speckled trout lures. Kyle suggests you try out a speckled trout lure from Brown Lures for your next fishing trip.
Tags: fishing, hunting, inshore fishing, outdoors, recreation, Recreation & Sports, saltwater fishing, sport fishing, sports, texas fishing, Wildlife
7 Costly Mistakes Made Elk Hunting in Colorado - Are You Leaving Your Big Bull in The Rockies?
Posted by Mike Boone | Filed under Recreation & Sports
There are some very costly mistakes that hunters will make each season while Elk Hunting in Colorado. They can be easily avoided - if you know what to look for. Sometimes the problem is from conflicting information that a Hunter has heard, but more often they are simply things that a Hunter did not realize was important or did not give enough thought to.
You Have To Be In Condition - Elk Hunting in Colorado takes place in very challenging terrain - the Mountains. This comes by both nature and necessity. There were originally 6 breed of Elk in North America - 4 remain and 2 have been extinct around 130+ years. Mainly due to over hunting and man invading their territory. The Elk fared better than the buffalo due to their ability to survive in the mountains. If you want to hunt these Elk, you have to be physically able to track them in rugged terrain. It will be your physical endurance, combined with the higher altitude, that will be the challenge. Some hunters that are not prepared, have had to leave after the first or second day - do not let that be you.
Elk Bugling - It takes practice and persistence to become a good bugler. Do not think you are going to go Elk Hunting in Colorado and practice your calls for the first time at your camp? You will probably scare every Elk off for 100 miles. You practice before your hunt - and a lot. Then you will bugle often when you are hunting - Elk do. The other mistake I see, is that hunters will bugle softer the closer they get to a bull (they think the will scare it off). The fact is - Bulls bugle louder when they get closer to each other. Its a competition - don’t let off.
Get a Good Pair of Binoculars - I know Elk Hunting in Colorado can be expensive - but don’t cut your nose off to spite your face. This is one thing that you do not skimp on. You can survive on Peanut Butter and Jelly for the week - but you need good quality binoculars! These animals are stealth and crafty - they can blend in behind a twig. Your ultimate goal is to locate them and track them from the beginning. No, your scope will not suffice - get really good binoculars.
Do Not Set Up Too Tight - My Mantra, Don’t take a shot unless you are 100% sure. You cannot take it if you have squeezed yourself into a spot that has no room to move. It might be a great to watch from - but do you have the freedom in your arms and legs to really set the shot up? Check for your available movement before you decide on a spot to take a shot from.
Elk Are Smart - Never Underestimate Your Competition - that is a quote all Elk Hunters should know. Elk know a lousy elk bugle, or the smell of you Axe body wash, or the sound of a truck door slamming - they have survived by being smart. Don’t underestimate their intelligence while Elk Hunting in Colorado.
Colorado Weather - You have to totally respect the weather while Elk Hunting in Colorado. It can be a perfect fall day in the afternoon and become freezing after the sun goes down. The snow in Colorado or the Rockies in general can change fast - especially in the highest altitudes. Prepare yourself - make sure you have supplies so you can start a fire and have thermal wraps. This can totally ruin a perfect Elk Hunt.
Just Stay Home - You will never bag a bull sitting in your living room - I don’t think they can ring the doorbell. I cannot promise you that you will get the big bull if you go elk hunting in Colorado - but I can promise you that you will not bag an Elk if you stay home - Go Elk Hunting!
Let’s go Elk Hunting in Colorado! For more Elk Hunting tips go to Mike Boone’s Elk Hunting blog at http://www.elkhuntingguide.net/
Tags: colorado elk hunting, elk hunting, elk hunting in colorado, elk hunting tips, hunting, hunting tips, outdoors, Recreation & Sports, sports
